DCCTools :: Knowledgebase
Search:     Advanced search

How to configure wireless settings on the VCI Pod and microPOD using configuration web page

Article ID: 508
Last updated: 27 Oct, 2017

  1. On a PC with the wiTECH application installed connect the VCI Pod/microPOD with a USB cable and enter IP “172.22.22.22” into the address bar of an Internet browser.
  2. Select Wireless Settings in the menu on the left

  1. Select New and enter the name of your profile that you are creating and select ADD

     
  2. In the Security Settings field enter the wiTECH Network
  • SSID,
  • Security: WPA PSK,
  • Enter Key:
  • Confirm Key:

     

  1. Select Save  at the top of page
  2. Select Close on the next page
  3. Select Manage Networks in the menu on the left

  1. Select radio button for the wireless interface

  1. Next to the profile that was just created select the Select & Start button

  1. Select Close on the next page

  1. Once the connection is complete you will see an IP address populate for the wireless interface
  • In some cases you may need to select the refresh button

Article ID: 508
Last updated: 27 Oct, 2017
Revision: 5
Views: 17407
Comments: 0
Posted: 16 Oct, 2014 by Maynard R.
Updated: 27 Oct, 2017 by KB Update K.
This article was:   Helpful | Not helpful
Attached files
file Comment configurer les microPods et VCI Pods_KB 508 509.pdf (1.02 mb)
file 如何设置VCI Pod_KB508.pdf (753 kb)
file Como configurar inalámbricamente el VCI Pod en el interface del equipo - KB 508.pdf (675 kb)

Prev   Next
microPOD II     Preferred method for connecting microPOD to wiTECH Diagnostic...