DCCTools :: Knowledgebase
Search:     Advanced search

VCI Pod & microPod Configuration

Article ID: 485
Last updated: 06 Nov, 2014

DESCRIPTION

 For your convenience, Chrysler has initiated a new self-serve process for configuring the wireless for your VCI Pod & microPod II tools using the newly introduced “Wireless Configuration Utility” that is accessible via MOPAR Technical Service Portal (www.witechsystem.com).

PROCEDURE

For specific instructions to configure using the “Wireless Configuration Utility”, click on the links below:

VCI Pod:  http://kb.dcctools.com/index.php?View=entry&EntryID=511

microPod II:  http://kb.dcctools.com/index.php?View=entry&EntryID=512

If you are unable to use the “Wireless Configuration Utility”, please click on the links below to configure wireless using tool configuration web page:

VCI Pod: http://kb.dcctools.com/index.php?View=entry&EntryID=508

microPod II : http://kb.dcctools.com/index.php?View=entry&EntryID=509

If you have already followed the KB Article instructions and you are still experiencing issues with configuring wireless on your VCI Pod or microPOD tool, please contact the wiTECH Help Desk at 1-888-948-3241 (1-888-WITECH-1) or E-mail witechsupport@dcctools.com for further assistance.

Article ID: 485
Last updated: 06 Nov, 2014
Revision: 12
Views: 56985
Comments: 0
Posted: 04 Apr, 2014 by Merriam L.
Updated: 06 Nov, 2014 by Maynard R.
This article was:   Helpful | Not helpful
Attached files
file KB 485_Configuración de VCI Pod y microPod.pdf (180 kb)

Also listed in
folder wiTECH -> microPOD II

Prev   Next
VCI Pod (wiPOD)     How to configure VCI Pod using Wireless Configuration Utility