DCCTools :: Knowledgebase
Search:     Advanced search

VIN Validation Delay Using wiTECH 14.01.20

Article ID: 411
Last updated: 07 Oct, 2013

You may be experiencing a VIN Validation message when viewing the Flash Tab (shown below) while utilizing wiTECH version 14.01.20.

If you experience this issue, the length of the delay will be dependent on your network speed. The temporary resolution is to restart the wiTECH Diagnostic Application and wiTECH Server.  After completing the restarts, wait 5 minutes before attempting a flash.  
The wiTECH development staff is aware of the problem and working on a resolution. If this issue is consistently reoccurring after restarting, contact the wiTECH Premium Support Help Desk at witechsupport@dcctools.com or call us at 1-888-wiTECH-1 (1-888-948-3241).
Article ID: 411
Last updated: 07 Oct, 2013
Revision: 1
Views: 6583
Comments: 0
Posted: 12 Aug, 2013 by -- .
Updated: 07 Oct, 2013 by Merriam L.
This article was:   Helpful | Not helpful
Prev   Next
2011–2012 JC/JF/LD/LX (Journey, Freemont, Charger, 300C) Hand...     Registration Required Message: “The registration server could...