DCCTools :: Knowledgebase
Search:     Advanced search

PowerNet (2011 JC, LD, LX) and 2012 Fiat 500 (FF) Vehicle Cable Reference Chart

Article ID: 201
Last updated: 16 Oct, 2013

The above charts illustrate the required Vehicle Cable when connecting to the current PowerNet (2011 JC, LD, LX) vehicles or the 2012 Fiat 500 (FF), depending on whether you are using a wiTECH VCI Pod or StarMOBILE tool.
The wiTECH VCI Pod requires the wiTECH VCI Pod Smart Cable when connecting to the 2012 Fiat 500 (FF).
  • The wiTECH VCI Pod Smart Cable may be ordered through the wiTECH Portal: www.witechsystem.com
  • wiPOD Smart Cable – Model 410 (wiTECH Specialty Items Category)
 
The StarMOBILE requires the StarMOBILE Smart Cable when connecting to the 2012 Fiat 500 (FF), and the current PowerNet (2011 JC, LD, LX) vehicles
  • StarMOBILE Smart Cable – Model 312 
  • Note: The StarMOBILE Smart Cable is part of the dealership essential tool program for U.S., Mexico, and Canada dealers.  Dealers in these markets can expect to automatically receive a StarMOBILE Smart Cable in the July/August 2011 timeframe.
 
**Please note that the Smart Cables can also be used for all vehicles that are supported by the standard vehicle cables.  See “Vehicle to Flight Recorder and Vehicle to Diagnostic Tool Reference Charts” for further information**

Article ID: 201
Last updated: 16 Oct, 2013
Revision: 1
Views: 8469
Comments: 0
Posted: 02 Dec, 2010 by -- .
Updated: 16 Oct, 2013 by Merriam L.
This article was:   Helpful | Not helpful
Also read
document StarMOBILE Smart Cable, PowerNet, and Fiat 500
document wiTECH VCI Pod Smart Cable and Fiat 500

Prev   Next
wiTECH Diagnostic Application: Supported Operating Systems     wiTECH VCI Pod Smart Cable and Fiat 500