DCCTools :: Knowledgebase
Search:     Advanced search
NGC (Next Generation Controller)
 
document NGC4 PCM (Powertrain Control Module) ECU Flash Failed: ECU Is Not Responding to the Tool as Expected/Flash Process Fails with "No Response Received from Transfer Data Request"
  VEHICLES: 2007+ Vehicles using NGC4 PCM ECU: NGC4 (Next Generation Controller) ERROR MESSAGE: ECU Flash Failed - The ECU is not responding to the tool as expected. Please restart the ECU flash. Flash...
rating 11 Oct, 2013 Views: 1514 Comments: 0
document NGC4 PCM (Powertrain Control Module) Flash Process Fails with "No Response Received from Transfer Data Request"
VEHICLE: 2007+ vehicles with 2.7L, 3.5L 3.7L, 3.8L, 4.0L 4.7L, 5.7L, or 6.1L engines using NGC4 PCM ECU: NGC4 (Next Generation Controller) DESCRIPTION: Flash process fails with message, "No response received from Transfer Data request." ...
rating 16 Oct, 2013 Views: 5927 Comments: 0
document 2004-2005 HB and 2005 LX Next Generation Controller (NGC) Powertrain Control Module (PCM) Unresponsive After Flash (Reprogramming) Abort or Failure
VEHICLES: 2004-2005 HB Durango and 2005 LX 300/Magnum/Charger DESCRIPTION: If the flash fails or is aborted on the above vehicles this PCM will become unusable and replacement will be required. If the flash fails or is aborted, the PCM will display as...
rating 16 Oct, 2013 Views: 1113 Comments: 0
document NGC PCM Flash (Reprogramming) Failure: “NR 0x22 - 'Conditions Not Correct or Request Sequence Error' Received”
ISSUE: Flashing a NGC PCM may result in an error message of “NR 0x22 - 'Conditions Not Correct or Request Sequence Error' received.” Flashing a NGC PCM is very robust and has a very low flash failure probability. This particular flash failure is very intermittent and affecting a...
rating 11 Oct, 2013 Views: 1681 Comments: 0
document Unable to Flash 2009 DS Replacement PCM due to ‘Invalid Part Number’
Date: 11/3/2009 - Update A TIPM ECU flash release has been submitted to the field to address this issue, and is now available.  Please refer to TSB 08-018-09, and first update the TIPM if applicable.  Then, proceed with flashing the PCM. Problem After replacing a PCM on a 2009 DS,...
rating 11 Jun, 2013 Views: 2409 Comments: 0
document 2008-2010 R2 (CKD) Caravan/Voyager Next Generation Controller (NGC) Powertrain Control Module (PCM) Unresponsive after Flash (Reprogramming) Abort or Failure
VEHICLES: 2008-2010 R2 (CKD) Caravan/Voyager   ISSUE: If the ECU reprogramming attempt fails or is aborted on the above vehicles, this PCM may become unresponsive and replacement may be required. The PCM may display as an unresponsive module on StarSCAN,...
rating 11 Oct, 2013 Views: 1097 Comments: 0
document Next Generation Controller (NGC) Powertrain Control Module (PCM) Flash Process Failure: "Negative Response 0x12, 'Sub Function Not Supported / Invalid Format' Received from Security Request Download Request"
VEHICLES: 2007+ vehicles equipped with Next Generation Controller (NGC) ECU: NGC  ISSUE: Flashing a NGC PCM results in an error message of “negative response 0x12 - 'Sub Function Not Supported / Invalid Format' received from Security Request Download...
rating 11 Oct, 2013 Views: 4311 Comments: 0