DCCTools :: Knowledgebase
Search:     Advanced search
VCI Pod (wiPOD)
 
document How to set/confirm the Date and Time on the VCI Pod/microPOD II
DESCRIPTION Setting/confirming that the Date and Time are correct on the VCI Pod is an important for keeping your device working properly.  Both the VCI pod and microPOD II have a web configuration page that users can access to view and update device information.   ...
31 Mar, 2014 Views: 2857 Comments: 0
document How to configure wireless settings on the VCI Pod
1.    Connect a PC or Laptop that has the wiTECH application installed to the wiTECH Access Gateway in ports 3 or 4 (preferred) you may also connect to the wiTECH wireless. Note: If PC or Laptop is not on the wiTECH network you may encounter discovery issues of the tools and...
01 Oct, 2014 Views: 9039 Comments: 0
document Using VCI Pods with Broken, Taped, or Loose Antennas
DESCRIPTION: VCI Pods with a loose antenna terminal and/or a broken or taped antenna will experience intermittent connectivity and should not be used and should be replaced as soon as possible. POLICY: It is the responsibility of the dealer to maintain the condition of their...
09 Oct, 2013 Views: 6189 Comments: 0
document wiTECH Flight Recorder
What Is the wiTECH Flight Recorder? The wiTECH Flight Recorder feature is intended to assist a technician in diagnosing hard-to-find or intermittent issues.  wiTECH Flight Recorder can be set up to record user-selected data items for a set duration of time before and after...
13 Dec, 2013 Views: 8544 Comments: 0
document How Do I Take the Pod out of Data Record Mode to View Recordings?
Exiting Data Record Mode: VCI Pod With the VCI Pod Trigger attached and the lights on the trigger green, press and hold the Trigger button. The Green light will begin to flash as though it is creating another recording.  Keep holding the Trigger button until the light goes...
23 Jul, 2014 Views: 9245 Comments: 0
document VCI Pod & microPod Configuration
  Connect a PC or Laptop that has the wiTECH application installed to the wiTECH Access Gateway in ports 3 or 4 (preferred) you may also connect to the wiTECH wireless. Note: If PC or Laptop is not on the wiTECH network you may encounter discovery issues of the tools and...
10 Oct, 2014 Views: 11369 Comments: 0
document How to configure wireless settings on the VCI Pod using configuration web page
For new or replacement VCI Pods, please follow the steps below for wireless configuration:   Connect VCI pod to PC via USB cable. Open web browser. In web browser address bar enter “172.22.22.22” (VCI Pod USB default IP). This will take you to the VCI...
16 Oct, 2014 Views: 685 Comments: 0
document How to configure wireless settings on the microPod II via configuration web page
Please follow the steps described below to configure the wireless settings on your microPOD II via the configuration web page Login to the wiTECH Portal by navigating to www.witechsystem.com Under Support, click on Knowledge Base Click login button to...
16 Oct, 2014 Views: 821 Comments: 0