DCCTools :: Knowledgebase
Search:     Advanced search
Sub Categories
 
folder wiTECH Diagnostic Application
wiTECH Diagnostic Application is the software installed on the PC that communicates with the Diagnostic tools, the wiTECH VCI Pod and the StarMOBILE
folder How-To Tutorials
folder Known Software Issues
All known software and hardware issues should be noted in this category.
folder General System Information
folder VCI Pod (wiPOD)
folder microPOD II
folder wiTECH FAQ
Frequently asked questions for wiTECH project.
folder 2014 Fiat 500L (BF)
folder 2013 Dodge Forza (BK, Venezuela)
folder 2014 Ram ProMaster (VF)
folder 2014 Cherokee (KL)
folder 2015 Chrysler 200 (UF)
folder 2015 JEEP Renegade (BU)
folder 2015 Ram ProMaster City (VM)
folder 2015 Fiat 500x (FB)


wiTECH
 
document How to Take the VCI Pod and Laptop out on a Road Test
1.  Connect the VCI Pod to the data link connector as usual with the supplied vehicle cable. 2.  Connect the VCI Pod to the wiTECH laptop using the supplied USB cable that came in the VCI Pod kit.  Any standard USB 2.0 A-male to mini-B cable can be used for the...
04 Oct, 2013 Views: 13036 Comments: 0
document NGC4 PCM (Powertrain Control Module) Flash Process Fails with "No Response Received from Transfer Data Request"
VEHICLE: 2007+ vehicles with 2.7L, 3.5L 3.7L, 3.8L, 4.0L 4.7L, 5.7L, or 6.1L engines using NGC4 PCM ECU: NGC4 (Next Generation Controller) DESCRIPTION: Flash process fails with message, "No response received from Transfer Data request." ...
16 Oct, 2013 Views: 11959 Comments: 0
document Change the OBD II Monitor Display for On-Road Driving
To simplify viewing data while on the road, a Change display size for on road view mode has been provided in OBD II Monitors.  Selecting this mode will radically increase text size and alter background colors so that data may be more easily read at a glance. Remember that you may take the...
04 Oct, 2013 Views: 2859 Comments: 0
document When Flashing (Reprogramming) a 2006 DR (RAM 2500/3500) 5.9L Cummins CM849 Engine Control Module (ECM), the Wireless Control Module (WCM) Becomes Unresponsive
VEHICLE: 2006 D1/DH 2500/3500 RAM 5.9L Cummins Diesel ECUs: Omron WCM (Wireless Control Module) Cummins ECM (Engine Control Module) CM849    ISSUE: After flashing (reprogramming) a Cummins CM849 ECM, the WCM may be unresponsive...
14 Oct, 2013 Views: 10840 Comments: 0
document U1601 Electronic Control Unit (ECU) Application Software Code 1 Missing OR Corrupted After Flashing (Reprogramming) Cummins Engine Control Module (ECM)
VEHICLES:  2007-2009 Ram 2500/3500 6.7L Cummins ECU: CM2100 Cummins ECU ISSUE: A Cummins ECM may give a false successful flash message after a flash failure or if a flash session has restarted automatically during the flash of...
14 Oct, 2013 Views: 15256 Comments: 0
document Fiat 500 Architecture: Ship Mode/Customer Mode Tool and Cable Requirements
Before delivering the vehicle to the customer, part of dealer prep includes placing the vehicle in Customer Mode in order to restore full vehicle functionality. The Exit Shipping Mode routine must be completed as follows:  ...
09 Oct, 2013 Views: 9997 Comments: 0
document Programming the Vehicle Identification Number (VIN) to PCM using wiTECH Diagnostic Application Requires VIN to Be Written in CAPS
  ECU: PCM (Powertrain Control Module)   Issue: After a PCM service part replacement, the vehicle's VIN must be written to the PCM. When attempting to write the VIN to the PCM, the wiTECH Diagnostic Application will possibly report an invalid VIN if any lowercase...
03 Dec, 2013 Views: 14551 Comments: 0
document Common Bluetooth Connection Error: Proper Bluetooth Disconnect Procedure (WIN XP 32 bit)
**Please keep in mind that issues specific to Windows XP are no longer supported by the wiTECH Premium Support Help Desk While using a Bluetooth connection with the CG wiTECH Diagnostic Application, the user may see this error during an attempt to Personal Area Network (PAN)...
10 Apr, 2015 Views: 14784 Comments: 0
document Common Bluetooth Connection Error: Proper Bluetooth Disconnect Procedure (WIN 7)
At times while using a Bluetooth connection with the CG wiTECH Diagnostic Application the user may see this error during an attempt to Personal Area Network (PAN) the VCI Pod with Windows 7:  Common Reasons: ...
26 Mar, 2015 Views: 14554 Comments: 0
document Next Generation Controller (NGC) Powertrain Control Module (PCM) Flash Process Failure: "Negative Response 0x12, 'Sub Function Not Supported / Invalid Format' Received from Security Request Download Request"
VEHICLES: 2007+ vehicles equipped with Next Generation Controller (NGC) ECU: NGC  ISSUE: Flashing a NGC PCM results in an error message of ‚Äúnegative response 0x12 - 'Sub Function Not Supported / Invalid Format' received from Security Request Download...
11 Oct, 2013 Views: 18169 Comments: 0

Previous Next
1 2 3 4 5 6 7